Booth Call Light v3 Kit (Pre-Built)

from $499.00

A silent, wireless call system for church media booths, fully assembled, programmed and tested. It arrives set up: the light strip is paired and every call station is already added to the booth. Plug it in, follow the guided setup on your phone, and you're ready for your next service. Anyone at a call station presses one small button, and the LED light strip in the media booth lights up in that station's own color, so your team knows exactly who needs them without anyone waving across the sanctuary.

New to Booth Call Light? See how it works, step by step.

What's included (starter kit)

• Booth light (B1): ESP32 booth board in a printed case with an Acknowledge button, plus a 100 ft Bluetooth LED light strip, already paired

• 3 call buttons (S1 to S3), each in a printed case with its own USB-C power supply, already added and locked to your booth

• Booth Call Light 3.1 firmware installed on every board

• Printed quick-start card

Features

• Up to 8 call stations, each named whatever your team calls that spot

• Custom color for every station, with pulse, flash or solid effects. Each station's color is unique, and red is reserved for the silent alert

• Silent red alert: hold any call button for 7 seconds and every booth light turns red. Nothing lights up at the button, so nobody nearby can tell

• Second booth light (B2): put it in another room, like a security office, and choose which stations it shows. Red alerts always show on every booth, and either booth can acknowledge the calls it shows

• Set up everything from one page, the booth's, right from your phone: add a station with one press of its button, send your Wi-Fi to every board, and change the passcode on all of them at once. No app, no coding

• A modern control page made for a dim media booth: the Live screen shows who's calling as one big card in their color, with a single Acknowledge button. Works on any phone or computer browser

• Free firmware updates install right from the booth's page: upload one file and the booth updates every call button and second booth light, then itself. Only official, signed Booth Call Light updates are accepted, and a box that doesn't start properly goes back to the previous version by itself

• Works over your church Wi-Fi for building-wide range, or direct radio with no router needed

• Every message between the boards is protected by your passcode, and Wi-Fi passwords and passcodes travel encrypted

• Booth key: every station you add locks to your booth automatically, so a second room or the church next door never mixes up calls

• Every board runs the same firmware and is wired the same way, so adding or replacing a station takes a minute. To start a board over, use Factory reset on its page (type RESET to confirm) or hold its button 15 seconds at power-up

• Every case is marked so you know which is which: B1 (booth light), B2 (second booth light), S1 to S8 (call stations)

Add-ons

• Need more call stations? Choose 3 to 8 stations above, or add more later with one button press each. A second booth light (B2) and a 30-minute setup video call are also available. Contact us for details.

Shipping and warranty

• Ships in 7 days, with $25 flat shipping in the US

• 2-year warranty on parts. It doesn't cover damage from misuse

Booth Call Light is a convenience signal for your media team, not a certified alarm or security system. Keep your normal safety procedures in place.

Booth Call Light is designed by AJaytheCEO. Patent pending.

Call stations:

A silent, wireless call system for church media booths, fully assembled, programmed and tested. It arrives set up: the light strip is paired and every call station is already added to the booth. Plug it in, follow the guided setup on your phone, and you're ready for your next service. Anyone at a call station presses one small button, and the LED light strip in the media booth lights up in that station's own color, so your team knows exactly who needs them without anyone waving across the sanctuary.

New to Booth Call Light? See how it works, step by step.

What's included (starter kit)

• Booth light (B1): ESP32 booth board in a printed case with an Acknowledge button, plus a 100 ft Bluetooth LED light strip, already paired

• 3 call buttons (S1 to S3), each in a printed case with its own USB-C power supply, already added and locked to your booth

• Booth Call Light 3.1 firmware installed on every board

• Printed quick-start card

Features

• Up to 8 call stations, each named whatever your team calls that spot

• Custom color for every station, with pulse, flash or solid effects. Each station's color is unique, and red is reserved for the silent alert

• Silent red alert: hold any call button for 7 seconds and every booth light turns red. Nothing lights up at the button, so nobody nearby can tell

• Second booth light (B2): put it in another room, like a security office, and choose which stations it shows. Red alerts always show on every booth, and either booth can acknowledge the calls it shows

• Set up everything from one page, the booth's, right from your phone: add a station with one press of its button, send your Wi-Fi to every board, and change the passcode on all of them at once. No app, no coding

• A modern control page made for a dim media booth: the Live screen shows who's calling as one big card in their color, with a single Acknowledge button. Works on any phone or computer browser

• Free firmware updates install right from the booth's page: upload one file and the booth updates every call button and second booth light, then itself. Only official, signed Booth Call Light updates are accepted, and a box that doesn't start properly goes back to the previous version by itself

• Works over your church Wi-Fi for building-wide range, or direct radio with no router needed

• Every message between the boards is protected by your passcode, and Wi-Fi passwords and passcodes travel encrypted

• Booth key: every station you add locks to your booth automatically, so a second room or the church next door never mixes up calls

• Every board runs the same firmware and is wired the same way, so adding or replacing a station takes a minute. To start a board over, use Factory reset on its page (type RESET to confirm) or hold its button 15 seconds at power-up

• Every case is marked so you know which is which: B1 (booth light), B2 (second booth light), S1 to S8 (call stations)

Add-ons

• Need more call stations? Choose 3 to 8 stations above, or add more later with one button press each. A second booth light (B2) and a 30-minute setup video call are also available. Contact us for details.

Shipping and warranty

• Ships in 7 days, with $25 flat shipping in the US

• 2-year warranty on parts. It doesn't cover damage from misuse

Booth Call Light is a convenience signal for your media team, not a certified alarm or security system. Keep your normal safety procedures in place.

Booth Call Light is designed by AJaytheCEO. Patent pending.